Home of the Jambalaya Festival since 1968
Epoxy Flooring in Gonzales, LA
Easy-clean floors for big cookers, old town slabs and garages just 10 feet above sea level.
- Free on-site estimates, with the slab moisture-tested before we recommend a system
- Written, itemized quotes that list every prep step and coat
- Surface prep explained up front: grinding, crack repair and dew point checks
Cook Pots, Old Slabs and Wet Ground
Epoxy flooring in Gonzales gets asked to do a lot. This is the self-styled Jambalaya Capital of the World, and the festival has run every year since 1968. Plenty of households here own a big black pot, a propane burner and a trailer to haul them. That gear usually lives in the garage, and so do the grease spots it leaves behind. A sealed, seamless floor makes cleanup a wipe instead of a scrub.
Grease, propane and cleanup
Bare concrete soaks up oil like a sponge. Once it is in, it rarely comes out. A coated floor keeps that oil on top where a degreaser and a mop can get it. For cook-off teams and backyard chefs, we suggest a chemical-resistant topcoat over flake. The flake adds grip when the floor is slick, and the topcoat keeps hot grease from etching the surface.
Ten feet above sea level
Per Wikipedia, Gonzales sits roughly 10 feet above sea level. Water tables sit close to the surface on ground that low, and slabs can pull moisture from below for years. We never skip the moisture test in Gonzales. High readings call for a vapor-tolerant primer, and we explain why it is on the quote instead of quietly leaving it out.
A town with older bones
Gonzales was laid out in 1906, became a village in 1922 and was chartered as a city in 1977. Some homes and shops near the old center are decades older than the subdivisions on the edge of town. Older concrete can be soft on top, cracked or patched with mixes that do not bond well. Expect more grinding and repair on those floors. Each repair gets its own price on the quote, so nothing is buried in a lump sum.
Wind season prep
Hurricane Gustav brought sustained winds above 80 mph with gusts over 100 mph to Gonzales in 2008. Storm season sends ladders, plywood, coolers and generators into the garage for weeks at a time. A thicker coating resists the gouges from dragging that gear around, and it makes the post-storm cleanup of mud and leaves much quicker.
Commercial floors along the corridor
Airline Highway helped the town grow into a crossroads, and the area has seen steady growth from industrial employers. Small shops, service garages and storage buildings along the corridor benefit from a durable concrete floor coating that handles carts, pallet jacks and spills. We can add striping to mark aisles or work zones.
Gonzales Facts That Affect Your Floor
- Jambalaya Capital. Gonzales holds the title Jambalaya Capital of the World, and its annual Jambalaya Festival began in 1968.
- Very low elevation. The city sits at roughly 10 feet above sea level, which keeps groundwater close to garage slabs.
- Long building history. The area was subdivided in 1906, incorporated as a village in 1922 and chartered as a city in 1977.
- Gustav winds. Hurricane Gustav in September 2008 brought winds of 80+ mph to Gonzales with gusts topping 100 mph.
Gonzales Questions
Will an epoxy floor stand up to a jambalaya burner and grease?
With the right topcoat, yes. Keep the burner itself on a metal stand or mat, since direct flame and extreme heat can scorch any coating. Grease drips and spills wipe up without soaking in.
Is a garage this close to sea level too damp to coat?
Not usually. We test every slab. A high reading means a damp-concrete primer goes down first. If water is actively seeping through cracks, we will tell you that needs fixing first.
My shop near the old part of town has a patched floor. Can it be coated?
Often it can. We grind off weak patches, fill cracks with a compatible repair material and level low spots before the coating goes down. The quote will list each repair.
Do you coat small commercial and storage buildings in Gonzales?
Yes. We use heavier systems for floors that see carts, pallet jacks or vehicle traffic, and we can stripe aisles and work areas as part of the job.
Free Estimates in Gonzales, LA
Gonzales garage, cook-off rig bay or shop? We measure and quote it free.
Epoxy Flooring Near Gonzales
- Epoxy Flooring in Baton Rouge, LA
- Epoxy Flooring in Prairieville, LA
- Epoxy Flooring in Denham Springs, LA
- Epoxy Flooring in Walker, LA
- Epoxy Flooring in Zachary, LA
- Epoxy Flooring in Central, LA
- Epoxy Flooring in Baker, LA
- Epoxy Flooring in St. Gabriel, LA
- Epoxy Flooring in Port Allen, LA
- Epoxy Flooring in Brusly, LA
- Epoxy Flooring in Addis, LA
- Epoxy Flooring in Plaquemine, LA
- Epoxy Flooring in Shenandoah, LA
- Epoxy Flooring in Oak Hills Place, LA
- Epoxy Flooring in Inniswold, LA
- Epoxy Flooring in Westminster, LA
- Epoxy Flooring in Gardere, LA
- Epoxy Flooring in Merrydale, LA
- Epoxy Flooring in Old Jefferson, LA
- Epoxy Flooring in Watson, LA
- Epoxy Flooring in Livingston, LA
- Epoxy Flooring in Hammond, LA
- Epoxy Flooring in Sorrento, LA